Frymaster 14 Series - Manual (Page 42)

4-24
4.12 Programming Level One
Level one programming is used to enter new products, control when AIF (auto intermittent filtration)
is disallowed, and perform deep clean (boil- out) and high-limit tests.
To enter Level 1 programming mode:
1. With the computer OFF, press the TEMP and INFO buttons
simultaneously (see Figure 97) for THREE seconds until LEVEL 1 is
displayed; a chirp sounds.
Figure 97
The computer displays ENTER Code and sounds an alert.
2. Enter 1234 (see Figure 98). 1 2 3 4
(1234)
Figure 98
The computer displays level 1 program for three seconds changing to Product
selection.
3. Press the
t and ubuttons (see Figure 99) to scroll between:
a. Product selection See pg. 4-24
b. aif clock See pg. 4-25
c. DEEP CLEAN MODE See pg. 4-27
d. high limit test See pg. 4-30
e. Fryer setup See pg. 4-9
Figure 99
4. With the desired selection displayed, press the (1 yes) button to select
chosen menu item (see Figure 100).
Figure 100
4.12.1 PRODUCT SELECTION
1. To add or edit products in the product selection mode see pg. 4-12 ADDING A NEW
PRODUCT ITEM TO THE MENU Steps 4-30.
The submenus under product selection are:
a. Name – Enter full product name limit eight characters (FR FRIES).
b. cook time – Enter cook time (ex. 3:30 as 0330).
c. temp – Enter cook temperature. (ex. 335° as 335).
d. cook id – Enter four (4) letter product ID (ex. CPSY).
e. qual tmr – Enter quality time for hold time (ex. 7:00).
f. DUTY TIME 1 – Enter the seconds into the cook cycle that the first duty alarm
sounds. (ex. 30 seconds- to shake fries).
g.
DUTY TIME 2 – Enter the seconds into the cook cycle that a second duty alarm
sounds.
h.
aif disable – Enter YES if AIF is to be disabled for specific products.
i. assign btn – Assigns menu items to a specific button for simplified cooking.