Frymaster 14 Series - Manual (Page 50)

4-32
4.13 Programming Level Two
To enter Level two programming mode:
1. With the computer OFF press the TEMP and INFO buttons (see Figure 148)
simultaneously for 10 seconds until LEVEL 2 is displayed; a third chirp
sounds.
Figure 148
The computer displays ENTER Code and sounds an alert.
2. Enter 1234 (see Figure 149). 1 2 3 4
(1234)
Figure 149
The computer displays level 2 program for three seconds changing to Product
comp.
3. Press the
t and u buttons to scroll between:
a. Prod comp See pg. 4-32
b. e-log See pg. 4-33
c. password See pg. 4-34
d. alert tone See pg. 4-35
e. fltr AFTr See pg. 4-36
f. fltr time See pg. 4-37
NOTE:
Use the
3and 4buttons to move between positions within the selections.
When entering numbers, press the corresponding button using the 0-9 keys.
Press the
t and ubuttons to accept input and move to the next or previous menu item.
4. With the desired selection displayed press the (1 yes) button (see Figure
151).
Figure 150
4.13.1 PRODUCT COMP MODE
The product comp mode allows the product compensation (sensitivity) to be changed. Some menu
items may need an adjustment, depending on their cooking characteristics. Use caution when
changing the product compensation, as it could have an adverse affect on the products cooking
cycles. By default the product compensation is set to four.
1. Perform steps 1-3 on page 4-32.
Computer displays Prod Comp.
2. With
prod comp displayed press the (1 yes) button (see Figure
151).
Figure 151