Frymaster 14 Series - Manual (Page 33)

4-15
The computer displays ASSIGN BTN on the left and the
chosen product on the right.
To assign the entered product to a button, follow instructions
below.
Figure 47
22. With the chosen product displayed on the right, and ASSIGN BUTTON on the left, press and
hold for three seconds a button between 1-0 to assign the product. The LED in the chosen
product button will illuminate (see Figure 47). To unassign a product from a button, press and
hold the button assigned to that product for three seconds. The LED no longer illuminates.
23. Once the button is assigned, press the
u (INFO) button (see Figure 48)
to save the assigned button.
The computer displays
name on the left with the product (ex. WINGS)
on the right.
* Note: If additional programming, to add other products, is necessary
necessary press the (2) button (see Figure 50) once and then the
4
button (see Figure 49) and return to step 4.
Figure 48
Figure 49
24. If no further programming is necessary, press the (2) button (see
Figure 50). The computer displays the select product option
with the product (ex. FR FRIEs) on the right screen. Press the (2)
button again (see Figure 50). Computer displays Level 1
program changing to the Product selection prompt.
Figure 50
25. Press the (2) button (see Figure 51) to quit and to return to OFF.
Figure 51
4.10.3 Storing Menu Items in Product Buttons
This function is used to store individual menu items to product buttons for one or two button
cooking.
To store menu items to a specific button:
1. Perform steps 1-6 on pages 4-12 thru 4-13.
2. The computer displays
name on the left and the selected product (ex. wings) on the right.
3. Press the
t button (see Figure 52) to scroll to the ASSIGN BTN option
used to assign a menu item to a specific product button.
4. The computer displays assign btn on the left and wings on the
right.
Figure 52