Grizzly G0622 - Manual (Page 24)

-22-
Model G0622 (Mfg 2/08+)
6. install the safety bracket and lock it in place
with the pin shown in figure 25 to keep the
saw from falling.
Note: To ensure the safety bracket fits
securely in the notch on the body frame, the
safety bracket may need to be slightly "modi-
fied" with a hammer or other appropriate
implement to fit securely.
head Locking pin
the head locking pin safely secures the head in
the down position. to ensure the head does not
unexpectedly spring up and tip the bandsaw over,
this locking pin must be properly inserted when
the bandsaw is not in use or before moving it.
To use the head locking pin:
1. diSConneCt BAndSAW FroM poWer!
2. Fully lower the head down, then insert the
locking pin through the holes in the head
pivot arm and base, as shown in
figure 26.
3. Before connecting the machine to power,
remove the locking pin.
figure 26. head locking pin correctly inserted.
head locking pin
The head locking pin secures the head in the
down, horizontal position. you MUST secure
the head with the locking pin before moving
the machine to prevent the head unexpect-
edly springing up causing the machine to tip
or fall. Otherwise, serious personal injury or
property damage could occur.
figure 25. Safety bracket.
Safety Bracket
pin
notch