Grizzly G0622 - Manual (Page 32)

-30-
Model G0622 (Mfg 2/08+)
Lubrication
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
•
loose mounting bolts.
• damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
• Clean after each use.
Monthly Check:
•
v-belt tension, damage, or wear.
• lubricate vise screw.
Annual Check:
•
lubricate gear box.
Schedule
Before applying lubricant to any area, wipe the
area clean to avoid contamination. lubricate the
vice screw shown in
figure 46 with multi-purpose
gear grease.
remove the cover on the gear box shown in
figure 47 and coat the gears with multi-purpose
gear grease.
Cleaning
Use a brush and a shop vacuum to remove chips
and other debris from the machine. Keep the
non-painted surfaces rust-free with regular appli-
cations of products like g96
® gun treatment,
Slipit ® , or Boeshield ® t-9.
periodically, remove the blade and thoroughly
clean all metal chips or built-up grease from the
wheel surfaces and blade housing.
figure 46. location to lubricate vise screw.
vise
Screw
figure 47. gear box location.
gear Box
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.