GE MONOGRAM ZV1050 - Manual (Page 10)

10
Installation Instructions
STEP 2 REMOVE THE PACKAGING
The vent hood is packed separately from the
decorative duct cover or accessory covers ZX1059SFSS
or ZX10510SFSS.
• Remove the frame, cover, parts box and packaging.
• Remove junction box cover.
• Install strain relief onto junction box cover.
STEP 3 CHECK INSTALLATION HARDWARE
Locate the hardware accessory pack shipped with the
hood and check contents.
Check contents of the accessory package.
538Dia14
538Dia11
538Dia8
538Dia13
538Dia9
538Dia30
538Dia38
538Dia16
Mounting Screw Holes
Attachment
Screw Hole (Left Side)
538Dia17
3 Phillips-Head Decorative Screws
4 Filters
4 Lock Washers
Template
Service Safety
Stop Screw
Check service manual envelope taped to the side
of the hood to be sure it contains one stop screw.
Leave this screw in the envelope.
4 Machine Screws
Support Frames
with 8 Screws
and 8 Washers
4 Hex-Head
Lag Screws
Decorative Duct Covers