GE MONOGRAM ZV1050 - Manual (Page 15)

15
Installation Instructions
STEP 12 INSTALL FILTERS, FINALIZE INSTALLATION
• Remove protective film on the filters.
• Tip the filter into the lower slots at the rear of the
opening. Lift the filter and pull the knob forward
until the filter rests on the slots.
• To remove the filters, grasp the knob and push the
filter towards the rear and tilt downwards.
• Remove the protective film covering the control
panel on the front face of the hood, and any other
packaging materials.
• Check all 4 lamps to ensure tightness in sockets.
• Refer to the Owner’s Manual for operating
instructions.
• Clean the hood with an approved stainless steel
cleaner.
Filter Slots
538Dia25
538Dia26
538Dia27