GE 164D2966P030 - Manual (Page 36)

CARE AND CLEANING
(continued)
Probe
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power for your oven at
the main fuse or circuit breaker panel.
Be sure to
let the light cover and bulb cool completely before
removing or replacing them. When in use, light bulbs
can become warm enough to break if touched with a
moist cloth or towel. When cleaning, avoid touching
warm lights with cleaning cloths if the light cover is
removed.
The oven light is covered with a removable glass
I
cover which is held in place with a wire. Remove the Wire cover holder
oven door, if desired, to reach the cover easily.
To remove:
Hold your hand under the cover so it doesn’t fall
when released. With fingers of the same hand, firmly
push back the wire cover holder. Lift off the cover.
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace cover:
Place it into the groove of the light receptacle. Pull the
wire forward to the center of cover until it snaps in
place. When in place, the wire holds the cover firmly.
Be certain the wire is in the depression in the center of
the cover.
Connect the electrical power to the
Oven Heating Elements
Do not clean the bake element or the broil element. Broil Element
Any soil will burn off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor. If
residue or ash accumulate Bake Element
around the bake element gently wipe around the
element with warm water.
36