Grizzly G1010 - Manual (Page 14)

-12-
G1010 4" x 6" Metal-Cutting Bandsaw
The Model G1010 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advise.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Unpacking
Set Up Safety
SECTION 3: SET UP
The Model G1010 is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Wrench 12mm ............................................ 1
• Wrench or Socket 14mm ............................ 1
• Safety Glasses (for each person) .............. 1
• Pliers .......................................................... 1
• Phillips Head Screwdriver #2 ..................... 1
• Level ........................................................... 1
• An Assistant ............................................... 1
• Square ........................................................ 1
• Wrench 1 ⁄
2
" .................................................. 1
• Wrench 7 ⁄
16
" ................................................. 1
• Wrench 9 ⁄
16
" ................................................. 1
Items Needed for
Set Up