Grizzly G1010 - Manual (Page 24)

-22-
G1010 4" x 6" Metal-Cutting Bandsaw
Figure 24. Adjustment bolt.
Figure 23. Adjusting table level.
Figure 25. Safety bracket.
5. Place a level on the table, as shown in Figure
23, and adjust the adjustment bolt shown in
Figure 24 until the table is level.
6. Install the safety bracket as shown in Figure
25 to keep the saw from falling.
Note: To ensure the safety bracket fits
securely in the notch on the body frame, the
safety bracket may need to be slightly "modi-
fied" with a hammer or other appropriate
implement to fit securely.
Safety Bracket