Grizzly 3HP Dry Spray Booth G0533 - Manual (Page 13)

Model g0533 (Mfg. since 3/11)
-11-
inventory
Shipping inventory (figure 2) Qty
A. spray Booth .................................................1
B. Curtain (right) .............................................1
c. Connector Bars ...........................................2
D. air Filter indicator (Manometer) ...................1
E. support Bar .................................................1
f. Work table ..................................................1
G. First stage Filters ........................................6
H. second stage Filters ...................................6
i. third stage Filters .......................................6
J. outlet ...........................................................1
K. exhaust Fan ................................................1
L. Curtain (left) ...............................................1
M. Curtain (upper) ............................................1
N. Curtain Brace (left) .....................................1
O. Curtain Brace (right) ...................................1
Hardware and Tools (Not Shown)
• hex Bolts
5 ⁄
16
"-18 x 1" (exhaust Fan, outlet) 18
• Flat Washers 5 ⁄
16
" (exhaust Fan, outlet) ...... 28
• inlet gasket (exhaust Fan) ............................ 1
• outlet gasket (outlet) ................................... 1
• hex nuts
5 ⁄
16
"-18 (outlet) ............................. 10
• Flat hd screws 1 ⁄
4
"-20 x 5 ⁄
8
"
(support Bar, Curtains, Work table) ............16
• hex nuts
1 ⁄
4
"-20
(support Bar, Curtains, Work table) ............ 16
• Flat Washers
1 ⁄
4
"
(support Bar, Curtains, Work table) .............16
• hex Bolts
5 ⁄
16
"-18 x 3 ⁄
4
" (Curtains) ................... 8
• tubing (Manometer) ...................................... 2
• tubing Connector Fitting (Manometer) .......... 1
• plastic Clip (Manometer) ............................... 1
• tap screw M4 x 12 (Manometer) .................. 1
• tap screws M4 x 45 (Manometer) ................ 2
• red gauge oil (Manometer) ......................... 1
• arrow labels (red and green) ..................... 2
F
K
h
g
d C
M
B
e
i
J
a
l
figure 2. g0533 inventory.
n o
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, check
the mounting location on the machine or the
packaging materials. Sometimes parts are
pre-installed for shipping, or they become
hidden by packaging materials.