Grizzly 3HP Dry Spray Booth G0533 - Manual (Page 20)

-18-
Model g0533 (Mfg. since 3/11)
SEcTiON 4: OPERATiONS
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
if you have never used this type of machine
or equipment before, WE STRONGLY REc-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly industrial will
not be held liable for accidents caused by
lack of training, neglect or misuse.
filter indicator
NOTicE: never operate the spray booth without
all of the air filters installed!
To fill the air filter indicator (manometer):
1. turn the spray booth OFF!
2. disConneCt the poWer!
3. Check to make sure the manometer body is
level. adjust as needed.
4. rotate the zero adjustment knob counter-
clockwise ( figure 18) until it stops, then turn
it clockwise three turns.
figure 18. air filter indicator controls.
plug
zero adjustment Knob
5. remove the plug (figure 18) and fill the
chamber with the included red gauge oil until
the fluid level reaches zero on the indicator.
Minor fluid level adjustments can be made
using the zero adjustment knob.
Note: only use dwyer ® red gauge oil to fill
the manometer. if you need additional oil,
order grizzly part number p0533062.