Grizzly 3HP Dry Spray Booth G0533 - Manual (Page 17)

Model g0533 (Mfg. since 3/11)
-15-
5. insert the sockets on the top curtain into the
connector bars, as shown in figure 10.
figure 10. top curtain attached to connector
bar.
2. repeat Step 1 with the right curtain.
3. Fasten each curtain brace to the top cover
with four 5 ⁄
16
"-18 x 3 ⁄
4
hex bolts as shown in
figure 8.
figure 9. inserting connector bar.
Connector
Bar
figure 11. installing table.
Work Table
To install the work table:
1. Fasten each of the work table hinges to the
spray booth with two 1 ⁄
4
"-20 x 5 ⁄
8
" flat head
screws, flat washers, and hex nuts as shown
in
figure 11.
4. insert a connector bar into the socket on each
curtain brace, as shown in figure 9.
figure 8. installing curtain brace.
Curtain
Brace