Grizzly 3HP Dry Spray Booth G0533 - Manual (Page 16)

-14-
Model g0533 (Mfg. since 3/11)
Outlet
To install the exhaust fan outlet:
1. Place the outlet gasket and outlet over the
exhaust fan, and secure with (10) 5 ⁄
16
"-18 x 1"
hex bolts, 20 flat washers, and 10 hex nuts,
as shown in
figure 5.
figure 5. installing outlet.
Support Bar
To install the support bar:
1. place the support bar between the lower right
and left edges of the spray booth ( figure 6),
and fasten each side with two 1 ⁄
4
"-20 x 5 ⁄
8
" flat
head screws, two flat washers, and two hex
nuts.
curtains
To install the curtains:
1. Fasten the hinges (figure 7) of the left cur-
tain to the front left side of the spray booth,
each with two
1 ⁄
4
"-20 x 5 ⁄
8
" flat head screws,
flat washers and hex nuts.
figure 6. support bar installed.
support Bar
figure 7. installing left curtain.