GE 25880 - Manual (Page 10)

10
Important Installation Guidelines
• Install telephone near both a telephone (modular) jack and an electrical
power outlet.
• Avoid sources of noise, such as a window by a busy street, and electrical
noise, such as motors, microwave ovens, and fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.
Installing the Handset Battery
NOTE: You must connect the handset battery before using the cordless handsets.
CAUTION: To reduce the risk of fire or personal injury, only use the
ATLINKS Ni-CAD battery model 5-2548 that is compatible with this unit
1. Locate battery and battery door which are packaged together inside a
plastic bag and are separate from the handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: It is important to maintain the polarity (black and red wires) to
the jack inside the compartment. To ensure proper battery installation, the
connector is keyed and can be inserted only one way.
RED WIRE
BLACK WIRE
BATTERY
PRESS DOWN
FIRMLY
4. Insert the battery pack.