GE 25880 - Manual (Page 24)

24
Corded/Cordless Handset to Speaker — Press speaker/call back, then hang
up the handset. Speak into the Speakerphone.
Intercom Operation
A two-way intercom is possible between the base and cordless handset
without tying up the telephone line and since the telephone line is not used,
you can still receive incoming calls.
NOTE: There is no conference and intercom features between handsets.
Making an Intercom Call
1. Make sure the phone is OFF (not in TALK mode).
2. Press the page/intercom button (on base) or int/transfer button (on
handset). A paging tone sounds at the base and cordless handset.
3. When finished, press the page/intercom button on base or int/transfer
button on cordless handset.
NOTE: To cancel the intercom call, press page/intercom on base or int/
transfer button on cordless handset.
Answering an Intercom Call
Cordless Handset-
1. Press the talk/end/call back button or int/transfer button.
2. When finished, press int/transfer button.
Base Unit-
1. Press the speaker/call back button or page/intercom.
1. When finished, press the page/intercom button.
Receiving an Incoming Telephone Call During an Intercom Call
During an intercom call, if you receive a telephone call, both intercom users
are alerted as follows:
Cordless Handset - Receives a ringing tone. To take the call, press talk/end/
call back. (The intercom connection is discontinued.)
Base - Speakerphone rings. To take the call, press the speaker/call back
button or lift the corded handset.