GE 25880 - Manual (Page 26)

26
Memory
The cordless handset and base each have their own separate memory
storage areas. Store ten 15-character names and 24-digit telephone
numbers in the handset and base memories.
Storing a Name and Number in Memory
1. Press the memory/conference button on the handset or base.
2. Press the desired memory location button (0 through 9 number keys) or
use the caller ID (rev or skip) button on the base or the caller ID/vol (- or
+) button on the handset to scroll to the desired location. If the memory
location is occupied, the stored name and number displays. If the
memory location is unoccupied, EMPTY shows in the display.
3. Press the memory/conference button again. The display shows
ENTER NAME.
4. Use the base or cordless handset touch-tone pad to enter a name (up
to 15 characters). More than one letter is stored in each of the number
keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Press the 5 key 3 times for the second letter L, and press the 1
key to insert a space between the first and last name. Press the 7 key 4
times for the letter S; press the 6 key once for the letter M; press the 4
key 3 times for the letter I; press the 8 key for the letter T; press the 4 key
twice for the letter H.
5. Press the memory/conference button again to save your selection. The
display shows ENTER TEL NUMBER.
NOTE: If you make a mistake, press the delete button on the base or del/chan
on the handset to backspace and erase the wrong character(s) or number(s).
6. Use the touch-tone pad to enter the area code followed by the telephone
number (up to 24 digits, including pauses) and press the memory/
conference button again to save your selection. The unit beeps to confirm.
7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.