GE 25880 - Manual (Page 13)

13
Telephone Set Up
There are twelve programmable menus available: Language, Display
Contrast, Rings to Answer, Security Code, Ringer Level, Ringer Tone, Set
Day, Set Time, Local Area Code, Link Cordless Handset, and Default Setting.
NOTE: Changing menu settings on the handset will only change the settings
on the handset, and changing menu settings on the base will only change the
settings on the base. For example, if you change the language on the handset,
it will not change language on the base.
NOTE: You can press program/flash button on base or flash/prog button on
the handset at any time to go to the next menu item.
NOTE: To exit the menu without making changes, press the *exit button on
the base or handset.
Language
NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button on base or flash/prog button on handset
until SET LANGUAGE 1ENG 2FRA 3ESP or 1ENG 2FRA 3ESP shows in
the display. 1ENG is the default setting.
NOTE: ENG stands for ENGLISH. FRA stands for French. ESP stands for SPANISH.
2. Press 1, 2, or 3 on the cordless handset or base touch-tone pad to enter
your selection, or press the caller ID (rev or skip) button on the base or
the caller ID/vol (- or +) button on the cordless handset to scroll to
your selection.
3. Press program/flash button on base or flash/prog button on handset
again to store your selection. You will hear a confirmation tone.
NOTE: The voice prompt language setting will follow the language setting
on the base. For example, if the language setting is French, the voice prompt
language is French.
Display Contrast
NOTE: This setting may only be made with the base.
1. Press the program/flash button until SET CONTRAST shows in the
display. 1 is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use
the caller ID (rev or skip) button on the base to scroll to your selection.