GE 25880 - Manual (Page 38)

38
1. Press the format/answerer button.
2. Press the 2 key (play/stop) and mailbox number.
3. When you are finished listening to your messages, press format/
answerer again to quit, or you may listen to the voice menu at any time
by pressing 7.
Answering System Indicator
The answering system is active by default. The display will show
ANSWERER OFF when the answering system is turned off.
Memory Full
When the answering system’s memory is full, the system answers after 10
rings, beeps, and waits for you to enter the 3-digit security code. You have
10 seconds to enter the security code before the phone hangs up.
You should erase some of the messages in order for the system to record
incoming messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
Accessing the Answering System from Another Location
You can access your answering system from any touch-tone phone by entering
your 3-digit security code after you hear the outgoing announcement.
1. Dial the phone number the answering system is connected to.
2. After the answering system answers, enter the security code after you
hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
The remote feature enables you to perform the following functions: