GE 25880 - Manual (Page 17)

17
4. Press the flash/prog button on the handset until LINK BASE? shows in the
display. NO is the default setting.
5. Press caller ID/vol (- or +) button on the handset to scroll to YES.
6. Press flash/prog on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
Default Setting
NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button on base or flash/prog button on handset
until DEFAULT SETTING or DEFAULT shows in the display. NO is the
default setting.
2. Use the touch-tone pad to select 1YES or 2NO, or press the caller ID (rev
or skip) button on the base or caller ID/vol (- or +) button on the handset
to scroll to YES or NO.
NOTE: If you choose YES all settings in the programmable menu return to
factory defaults except day and time.
3. Press the program/flash button on base or flash/prog button on handset
again to store your selection.
Basic Operation
Answering a Call
Check the display to see who is calling.
NOTE: You can only use one handset at a time. UNAVAILABLE will be
displayed if other handset is in use.
Cordless Handset
1. Press the talk/end/call back button on the handset.
2. When finished, press talk/end/call back or place the handset in charging
cradle to hang up.
Corded Handset
1. Lift the handset.
2. When finished, put the handset back on the cradle to hang up.