Stovax PM235 RV66AVC - Manual (Page 31)

31
To complete this operation:
• Open the main fire door to give access to the hinge
block as shown in diagram 5
• Use a 3mm A/F hexagon key to loosen fixing screws,
diagram 9,
• Reposition the hinge blocks to achieve a correct fit
This may need a trial and error approach to find
the correct position.
Fixing Screws
5
13B. ADJUSTING DOOR HINGES
RIVA AVANTI
13a.1 To maintain the safe use of your Riva, you may need
to adjust the door hinges to ensure safe correct closing of
the door.
To complete this operation:
• Open the main fire door to give access to the hinge
block as shown in diagram 6
• Loosen the 6 fixing screws using a 4mm A/F hexagon
head socket key to adjust the door alignment
• Turn screw A to level the door
• Turn screw B to raise or lower the door
• Re-tighten the fixing screws and check alignment
This may require a trial and error approach to find the
correct position.
12B. ADJUSTING DOOR CATCH
RIVA AVANTI
(Tool required - 13mm A/F spanner)
12b.1 To maintain the safe use of your Riva, you may need to
adjust the door catch to ensure safe correct closing of the
door.
To Complete this operation:
• Open the main firedoor to give access to the fixed part of
the door catch as shown in diagram 4
4
• Use a 13mm A/F spanner loosen the locking nut holding
the catch block shown in diagram 8,
• Reposition to achieve the correct fit
This may need a trial and error approch to find the correct
position.
12b.2 If the door still feels loose after correcting the catch
operation, the door rope seal is worn and requires
replacement, as detailed in section 8.
13A. ADJUSTING DOOR HINGES - RIVA
13a.1 To maintain the safe use of your Riva, you may need
to adjust the door hinges to ensure safe correct closing of
the door.
MAINTENANCE and SERVICING