Genie Z-45 - Manual (Page 14)

12 Genie Z-45/25 & Genie Z-45/25J Part No. 82600
Operator's Manual Second Edition · Second Printing
Maintenance
Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Maintenance Symbols Legend
The following symbols have been
used in this manual to help
communicate the intent of the
instructions. When one or more of
the symbols appear at the
beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be
required to perform this procedure.
Indicates that a cold engine is required
before performing this procedure.
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Check the oil level with the
engine off.
1 Check the oil dipstick. Add oil as needed.
Ford LRG-425 EFI Engine
Oil type 10W-40
Oil type - cold conditions 10W-30
Use oils meeting API classification SH or SG.
Units ship with 10-40 CC/SG.
Deutz Engine F3L 1011F
Oil type 15W-40
Oil type - cold conditions 10W-40
Engine oil should have properties of API classification
CC/SE, CD/SE, SF/CC or SF/CD grades.
Units ship with 10-40 CC/SG.
Perkins Engine 104-22 Engine
Oil type 15W-40
Oil type - cold conditions 10W-40
Engine oil should have properties of API classification
CC/SE, CD/SE, SF/CC or SF/CD grades.
Units ship with 10-40 CC/SG.