Genie Z-45 - Manual (Page 2)

Genie Z-45/25 & Genie Z-45/25J Part No. 82600
Operator's Manual Second Edition · Second Printing
Copyright © 1998 by Genie Industries
First Edition: Seventh Printing, May 2002
Second Edition: Second Printing, August 2004
"Genie" and "Z" are registered trademarks of
Genie Industries in the U.S.A. and many other
countries.
These machines comply with
ANSI/SIA 92.5-1992.
Printed on recycled paper
Printed in U.S.A.
Important
Read, understand and obey these safety rules and
operating instructions before operating this machine.
Only trained and authorized personnel shall be
permitted to operate this machine. This manual should
be considered a permanent part of your machine and
should remain with the machine at all times. If you
have any questions, call Genie Industries.
Contents
Page
Safety ........................................................................ 1
Controls ..................................................................... 7
Pre-operation Inspection ........................................... 10
Maintenance ............................................................. 12
Function Tests .......................................................... 16
Workplace Inspection ................................................ 23
Operating Instructions ............................................... 24
Transport and Lifting Instructions .............................. 29
Decals ...................................................................... 32
Specifications ........................................................... 36
Contact us:
Internet: http://www.genielift.com
E-mail: [email protected]