Genie Z-45 - Manual (Page 24)

22 Genie Z-45/25 & Genie Z-45/25J Part No. 82600
Operator's Manual Second Edition · Second Printing
FUNCTION TESTS
Test Auxiliary Controls
50 Shut the engine off.
51 Pull out the red Emergency Stop button to
the on position.
52 Press down the foot switch.
53 Simultaneously hold the auxiliary power switch
on and activate each function control handle or
toggle switch.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom and steer functions should
operate. Drive functions should not operate with
auxiliary power.
Test the Lift/Drive Select Function
(if equipped)
54 Press down the foot switch.
55 Move the drive control handle off center and
activate a boom function toggle switch.
Result: No boom functions should operate. The
machine will move in the direction indicated on
the control panel.
56 Repair any malfunctions before operating the
machine.