Grizzly G0696X - Manual (Page 19)

-16- g0605X1-6X1, g0696X-97X (mfg. 8/11+)
G0605X1/G0606X1
Inventory
J. Blade 12" .................................................... 1
Figure 11. saw blade.
J
Figure 10. g0605X1 component inventory.
B
d
C
E
g
F
h
i
Table Saw unit
Box contents (Figure 10 & 11): Qty
A. table saw Unit (not shown) ...................... 1
B. spreader/guard .......................................... 1
c. push stick .................................................. 1
D. miter gauge ................................................ 1
E. miter gauge handle ................................... 1
F. Fence resting Brackets ............................. 2
G. handwheel handles ................................... 2
h. Arbor Wrenches ........................................ 2
I. switch disabling lock ................................ 1
Fence Inventory
Box contents: (Figure 12) Qty
A. Fence ......................................................... 1
B. Fence handle ............................................. 1
A
B
Figure 12. Fence components.
Fence Rail Inventory
Box contents: (Figure 13) Qty
A. Fence tube (91 3 /
8
" long) ............................ 1
B. Front rail (91 1 /
8
" long)................................ 1
c. rear rail (79" long) ................................... 1
Figure 13. Fence rail components.
A
B
C
hardware and Tools (Not Shown): Qty
• Flat Washer 8mm (miter gauge) ................ 1
• Flange Bolts m8-1.25 x 12
(Fence resting Bracket) ............................. 2
• Flange Bolts m8-1.25 x 12 (switch) ............ 2
• open-End Combo Wrenches
8 x 10, 11 x 13, 14 x 17 ......................1 Each
• hex Wrenches 3, 4, 5, 6mm ..............1 Each
• Combo screwdriver .................................... 1
• lock Knob m5-.8 (insert) ............................ 1
• Wire nuts ................................................... 3
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, check
the mounting location on the machine or the
packaging materials. Sometimes parts are
pre-installed for shipping, or they become
hidden by packaging materials.