GE 49-85179 - Manual (Page 15)

Not all features are on all models.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the Kitchen Timer On/Off pad.
Touch the + or – pads until the amount
of time you want shows in the display.
The maximum time that can be entered
in minutes is 59. Times more than 59
minutes should be changed to hours
and minutes.
If you make a mistake, touch the Kitchen
Timer On/Off pad and begin again.
Touch the Start/On pad. The time
will start counting down, although
the display does not change until
one minute has passed.
When the timer reaches :00, the control
will beep 3 times followed by one beep
every 6 seconds until the Kitchen Timer
On/Off pad is touched.
The timer is a minute timer only.
The Clear/Off pad does not affect
the timer.
Using the clock and timer.
(on some models) GEAppliances.com
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a delayed cooking
or a delayed self-cleaning cycle.
Touch the Clock pad twice.
Touch the + or – pads.
If the + or – pads are not touched within
one minute after you touch the Clock pad,
the display reverts to the original setting.
If this happens, touch the Clock pad twice
and reenter the time of day.
Touch the Start/On pad until the time
of day shows in the display. This enters
the time and starts the clock.
To check the time of day when the display
is showing other information, simply touch
the Clock pad. The time of day shows until
another pad is touched.
Make sure the clock is set to the correct
time of day.
15
To Turn Off the Clock Display
If you have several clocks in your kitchen, you
may wish to turn off the time of day clock
display on your range.
Touch the Clock pad once to turn
off the time of day display. Although
you will not be able to see it, the clock
maintains the correct time of day.
Touch the Clock pad twice to recall
the clock display.
O
pe
ra
tin
g
In
str
uc
tio
ns
Ca
re
a
nd
C
lea
nin
g
In
sta
lla
tio
n
In
str
uc
tio
ns
Tro
ub
les
ho
ot
in
g
Tip
s
Sa
fe
ty
In
str
uc
tio
ns
Co
ns
um
er
S
up
po
rt