GE 49-85179 - Manual (Page 33)

33
Installation Instructions
DIMEnSIonS AnD ClEARAnCES
Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be met for safe
use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric outlet locations) may be
adjusted to meet specific requirements.
The range may be placed with 0″ clearance (flush) at the back wall.
To cabinets below
cooktop and at the
range back
30”
30”
1”
2”
Minimum
13” To wall on either side, standard
burner models
To wall on either side,
sealed burner models
Maximum depth
for cabinets
above
countertops
Front edge of
the range side
panel forward
from cabinet
18”
0”
(Minimum) 1/4”
(Minimum)
Minimum to
cabinets on
either side of
the range
36”
To cabinets below
cooktop and at the
range back
30”
30”
6”
Minimum
13”
Minimum
clearance
to right wall
Maximum depth for
cabinets above
countertops
Front edge of the
range side panel
forward from
cabinet
18”
0”
(Minimum) 1/4”
(Minimum)
Minimum
to cabinets
on either side
of the range
36”
3”
Minimum
clearance
to left wall