GE 49-85179 - Manual (Page 40)

ElECTRICAl ConnECTIonS (ConT.)
B. Usage Situations where Appliance Power Cord will
Be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the 2-prong
wall receptacle replaced with a 3-prong (grounding)
receptacle by a qualified electrician before using the
appliance.
he installation of appliances designed for mobile
home installation must conform with the Manufactured
Home Construction and Safety Standard, Title 24 CFR,
Part 3280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),ANSI
A225.1, latest edition, or with local codes. In Canada, mobile
home installation must be in accordance with the current
CAN/CSA Z240/MH Mobile Home Installation Code.
Electric Disconnect
n Locate disconnect plug on the range back.
n Pinch sides of connector and pull out of range back.
3
SEAl THE oPEnInGS
Seal any openings in the wall behind the range and
in the floor under the range when hookups are completed.
4
40
Installation Instructions
ASSEMBlE SURFACE BURnERS
Assemble the burners as shown.
The top sides of the Right Front, Right Rear and Left
Front burner heads are marked with the letters “RF”, “RR”
and “LF”, respectively, to aid assembly.
5
Grate
Burner head
Burner cap
Electrode
Burner base
CAUTIon:
Do not operate the burner
without all burner parts in place.
Medium head
(not marked)
and cap
Front of
range
Large
head and
cap
Small head
and cap
Extra large
head and
cap
LF
RR
RF