GE A8950CC User Manual
Page 16
Connection instructions
Video Inputs:
Connect video source equipment such as cameras or matrix switcher outputs to the
video input modules using the BNCs on the back of the panel. Confirmation of video
presence can be confirmed on the front panel LCD. The channel order is sequential,
beginning with the top BNC in slot 5 as Channel 1, working vertically such that the
bottom BNC in slot 5 is assigned Channel 4, and the top BNC in slot 6 is
assigned Channel 5. This continues to the bottom BNC in slot 8, which is mapped
to Channel 16.
Video Outputs:
Connect video monitoring equipment including monitors and recording devices, to
the video output cards using the BNCs on the back of the panel. Confirmation of video
output can be confirmed on the front panel LCD. As with the inputs cards, the channel
order is sequential, beginning with the top BNC in slot 11 as Channel 1, working vertically
such that the bottom BNC in slot 11 is assigned Channel 4, and the top BNC in slot 12 is
assigned Channel 5. This continues to the bottom BNC in slot 14, which is Channel 16.
14