GE A8950CC - Manual (Page 46)

Model Part Number
1 Slot Panel A8957RP1
4 Slot Panel A8957RP4
Overview
Specifications Product ordering
The Phoenix blank panel(s) are available in one-slot
(A8957RP1) and four-slot (A8957RP4) models and are designed
and recommended for covering any open or unused card
access points on the back of the Phoenix card rack.
Tools and materials required
The blank panels are held in place with simple thumbscrews
with screwdriver slots. The only tool recommended is a small
flat blade screwdriver.
Installation instructions:
From back of Phoenix card rack, locate any unused module
slots. If they are one card slot wide, use part number
A8957RP1 for single slot openings and A8957RP4 if the
opening is four slots wide.
Line up the thumbscrews with the threaded hole on the open
panel and tighten top and bottom screws until panel fits
snugly in empty slot.
Model A8957RP1 A8957RP4
Size
Weight
Model Part Number
1 Slot Panel A8957RP1
Model Part Number
4 Slot Panel A8957RP4
Model Part Number
Arrow symbol in upper right
hand corners of blank panels
represent direction panels are
to be attached to chassis.
0.74 in. W x 3.30 in. H (19 x 84 mm) 2.99 in. W x 3.30 in. H (77 x 84 mm)
.2 oz. (5.7 g) .8 oz. (22.85 g)
V
Blank Panel Installation and Specifications
44
Limited warranty
GE Security warrants that equipment will be free from defects in material
and workmanship and will substantially conform to the relevant
specifications published by GE Security for a period of five years from
delivery. During this period, GE Security will, at its option repair or replace
any defective item of equipment or part or component of equipment,
which GE Security determines was defective due to faulty material or
workmanship and coordinate the replacement of the failed equipment
provided that GE Security was responsible for the original installation
of the equipment.
GE Security will warrant that equipment shall be free from defects in
material and workmanship and will substantially conform to the relevant
specifications published by GE Security for a period of one year from
delivery. During this period, GE Security will at its option, repair or replace
any defective item of equipment or part or component of equipment
which GE Security determines was defective due to faulty material or
workmanship. Customer will pay transportation and insurance costs to
ship the equipment. GE Security will pay the return costs if the equipment
is determined to have been defective.