GE A8950CC User Manual
Page 9
2. Install data module:
Up to four data modules can be installed in the Phoenix node.
From left, locate and insert data modules into slot 1, 2, 3, or 4
(color-keyed red) and secure.
3. Connect:
Each data module is shipped with (four) RJ45 cables and (four) breakout boxes to aid in
connecting to the Phoenix. Use the tables below to determine pinout information for
your application. GE Security recommends using shielded cable for all single ended
applications and twisted shielded cable for all differential formats. Wire gauge is
dependent on copper run length. Refer to manufacturer of data equipment for
specific recommendations. Once the data equipment has been connected, confirmation
of data activity can be verified on the front panel LCD.
The channel order is sequential, beginning with the top RJ45 in slot 1 as Channel 1,
working vertically such that the bottom RJ45 in slot 1 is Channel 4, and the top RJ45 in
slot 2 is Channel 5. This continues to the bottom RJ45 in slot 4, which is mapped to
Channel 16.
INSERT DATA CARDS IN SLOTS 1-4 (Red)
7