GE A8950CC - Manual (Page 2)

Installation Instructions
BEFORE YOU BEGIN 1
GETTING STARTED 2
Overview 2
Determine Mounting Configuration 2
Installing Power Supply 2
INSTALLING THE OPTICAL TRANSCEIVER MODULE 3
Point-to-Point, Repeater, Self-Healing Ring Diagrams 4
LED Operating Status 5
INSTALLING THE DATA MODULE 6
Configuring the Data Module 6
Install Data Module 7
Connect Data Module 7
Channel Mapping 7
Connection Instructions 8
RS-232, TTL, RS-422, RS-485, Manchester/Biphase Interface 9
RS-485, Sensornet, Test Mode 9
Data Module - Channel Sequence 10
INSTALLING THE ETHERNET MODULE 11
Install Ethernet Module 11
Connect Ethernet Module 12
INSTALLING THE VIDEO MODULE 13
Install Video Input Module 13
Install Video Output Module 13
Connection Instructions 14
Video Module - Channel Sequence 15
INSTALLING THE AUDIO MODULE 16
Configuring the Audio Module 16
Audio Input Termination Diagrams 17
Audio Input/ Output Charts 18
Audio Module - Channel Sequence 19
INSTALLING THE CONTACT CLOSURE MODULE 20
Install Contact Closure Module 20
Connection Instructions 21
RJ45, Contact Input/ Contact Output Charts 22
Contact Input/ Contact Output - Channel Sequence 22
CONFIGURING THE PHOENIX FIBER OPTIC COMMUNICATION SYSTEM 23
Turn on power and check status 23
Select the system topology 24-26
Set the node ID 26
FRONT PANEL MENU TREE AND DESCRIPTIONS 27
Main Menu Options 28-31
Menu Options: Video 31-33
Menu Options: Data 34-36
Menu Options: Ethernet 37
Menu Options: Audio 38-39
Menu Options: Contact Closure 39-41
MAIN LOCAL POWER/ MAIN LOCAL TEST/ MAIN LOCAL ABOUT 41-42
MAIN REMOTE/ MAIN ABOUT 42-43
BLANK PANEL SPECIFICATIONS AND LIMITED WARRANTY 44
OPTICAL TRANSCEIVER MODULE SPECIFICATIONS 45
DATA MODULE SPECIFICATIONS 46
ETHERNET MODULE SPECIFICATIONS 47
VIDEO MODULE SPECIFICATIONS 48
AUDIO MODULE SPECIFICATIONS 49
CONTACT CLOSURE MODULE SPECIFICATIONS 50
CUSTOMER SUPPORT 50
Phoenix Fiber Optic Communication System