Motorola SB4101 - Manual (Page 3)

This product was FCC compliant under test conditions
that included the use of the supplied cable between
system components. To be in compliance with FCC
regulation, the user must use this cable and install it
properly.
Different types of cord sets may be used for
connections to the main supply circuit. Use
only a main line cord that complies with all
applicable product safety requirements of the country of
use.
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for Class B
Personal Computers and Peripherals; and/or CPU
Boards and Power Supplies used with Class B Personal
Computers, Motorola BCS, 6450 Sequence Drive, San
Diego, CA 92121, 1-800-225-9446, declares under sole
responsibility that the product identifies with 47CFR Part
2 and 15 of the FCC Rules as a Class B digital device.
Each product marketed is identical to the representative
unit tested and found to be compliant with the standards.
Records maintained continue to reflect the equipment
being produced can be expected to be within the
variation accepted, due to quantity production and
testing on a statistical basis as required by 47CFR 2.909.
Operation is subject to the following condition: This
device must accept any interference received, including
interference that may cause undesired operation. The
above named party is responsible for ensuring that the
equipment complies with the standards of 47CFR,
Paragraph 15.101 to 15.109.
Canadian Compliance
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numérique de la classe B
respects toutes les exigences du Règlement sur le
matériel brouilleur du Canada.