Motorola SB4101 User Manual
Page 37
X
Home
Exit
Introduction
Before You Begin
Installation
Configuration
Troubleshooting
Legal
30
The values shown for Adapter Address, IP
Address, Subnet Mask, and Default Gateway
on your PC will be different than those shown
in the example above.
If autoconfiguration is displayed before IP
Address in Windows 98, call your service
provider.
Verifying Your IP Address in
Windows 95, 98, and Me
The following basic instructions are for Windows 95, 98, and Me. The instructions for
verifying your IP address for Windows 2000 are found on the next page. For any other
operating system, please refer to your specific operating system guide for IP address
verification.
To check the IP address:
1
On the Windows Desktop, click Start.
2
Select Run.
3
Type winipcfg.exe and click OK. A window similar to the example shown on this
page is displayed.
4
Select your adapter name—the Ethernet card or USB device.
5
Click Renew.
6
Click OK after the system displays an IP address.
If after performing this procedure your computer does not access the Internet, call your
service provider. They will assist in your configuration.