Configuring for tcp/ip in windows 2000 – Motorola SB4101 User Manual
Page 35
Advertising
28
X
Home
Exit
Introduction
Before You Begin
Installation
Configuration
Troubleshooting
Legal
Configuring for TCP/IP in Windows 2000
7
Click Protocol on the Select Network Component Type window and then click
ADD. The Select Network Protocol window is displayed similar to the example on
the lower left of this page.
8
Click Internet Protocol (TCP/IP) in the Network Protocol section of Select Network
Protocol window.
9
Click OK and the Local Area Connection # Properties window is re-displayed as
shown at the top of the next page.
Advertising