Monster Power HTS5000 - Manual (Page 12)

PHONE
OUT 1 IN
OUT 2
6
HOOKUP GUIDE
STEP 1 DBS/DVD/Phone Line Hookup
NOTE:
The PowerCenter is intended for hookup of a single phone line only. A second line will NOT be connected through
the phone line surge protector. You can use this feature as a phone splitter, however. If the “PHONE IN USE –
OUT 1” LED is on, the phone or Pay-Per-View device plugged into the OUT 1 outlet is in use and Monster’s Access
Control Unit disengages the OUT 2 outlet. If the “PHONE IN USE – OUT 2” LED is on, the phone or Pay-Per-View
device plugged into the OUT 2 outlet is in use and Monster’s Access Control Unit disengages the OUT 1 outlet.
FOR PAY-PER-VIEW DEVICES (SUCH AS DBS)
A) Connect one end of a phone cable into a telephone wall jack. Plug the other end into the HTS 5000
“IN” jack (figure 1a).
B) Connect a second phone cable from one of the HTS 5000 “OUT” jacks to the Pay-Per-View input
on your DBS receiver or DVD player (figures 1b and 1c).
FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW DEVICE)
A) Connect a phone cable from a telephone wall jack to the HTS 5000 “IN” jack. Connect a second
phone cable from one of the HTS 5000 “OUT” jacks to the telephone (figures 1b and 1c).
Figure 1a
From telephone
wall jack
Figure 1b
To DBS receiver, DVD player,
or telephone
Figure 1
Figure 1c
To DBS receiver, DVD player,
or telephone