Monster Power HTS5000 - Manual (Page 23)

STEP 10 Rack Mounting Your PowerCenter
A) Remove your PowerCenter trim covers using a 3/32 Allen key (not included). Turn each Allen screw
counter-clockwise until the screw is completely removed.
B) Align one rack ear over the three 3/32 holes on the left side of the PowerCenter. Using a 3/32 Allen key,
turn the three Allen screws (provided) clockwise until tight.
C) Align the remaining two holes on the left side of the rack ear with the two holes on the left side
of your rack. Using a Phillips screwdriver, turn the two Phillips screws (not included) clockwise until tight.
D) Repeat steps B and C for installation of the rack ear on the right side of the PowerCenter.
HTS 5000 Rack Ears
17