Monster Power HTS5000 - Manual (Page 26)

20
HTS 5000 FEATURES
NUMBERS REFER TO DRAWINGS ON PAGES 19
INDEX DRAWINGS
1. Wiring Reversed LED: Indicates that polarity is reversed on AC lines. If the LED is on, unplug the HTS 5000
and consult an electrician.
2. Ground OK LED: Indicates PowerCenter is plugged into a properly grounded 120V AC power outlet.
3. Surge Protected LED: Indicates Monster Power Surge Protection Circuitry is functioning properly.
4. Clean Power LED: Indicates Monster Clean Power circuitry is functioning.
5. Unswitched On LED: Indicates components plugged into the outlets programmed as “unswitched”
are receiving AC power.
6. Switched On LED: Indicates components plugged into the outlets programmed as “switched on” will receive
power when the ON button is pressed.
7. Timed On LED: Indicates components plugged into the outlets programmed as “switched on after delay”
will receive power after a delay.
8. Phone In Use LED: Shows activity on the phone line.
9. Expanded Scale Volt Meter with Adjustable Illumination: Measures incoming voltage and shows
fluctuations in the AC power.
10. On Button: Press to provide AC power to outlets programmed as “switched on” or “switched on after delay”.