Monster Power HTS5000 - Manual (Page 27)

21
NUMBERS REFER TO DRAWINGS ON PAGES 19
11. Meter Illumination Button: Adjusts amount of light to the volt meter.
12. Off Button: Press to shut down outlets programmed as “switched on” or “switched on after delay”.
13. Digital Isolation Filters: For digital components such as CD players, DVD players, and satellite receivers,
special filter circuit designed to reduce interference such as digital noise from your components getting into
the rest of your system.
NOTE: It does not harm analog video components or analog audio components to be connected to the digital
outlet section. However, for the best possible performance, we recommend plugging in only digital
components here.
14. Video Interference Reduction Filter: Special filter circuit designed to reduce interference (such as wide band
noise that would disturb video performance) to your video components.
NOTE: It does not harm audio components or digital components to be connected to the video outlet section.
However, for the best possible performance, we recommend plugging in only video components here.
15. Analog Audio Filter: For low current analog audio components such as preamplifiers and tape decks,
special filter circuit that reduces noise from the AC power line that would degrade the audio performance.
NOTE: It does not harm video components or digital components to be connected to the analog audio
outlet section. However, for the best possible performance, we recommend plugging in only
low current analog audio components here.
NOTE: After a powerline or lightning surge, the HTS 5000 MKII may provide an audio tone from the internal
buzzer. If the surge protect light is off, the unit will no longer provide surge protection.