Mitsumi electronic WD-Y577 - Manual (Page 9)

1. Television Overview 9
TV Back Panel
1. ANT 1/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna or direct cable without
a cable box, connect the main antenna or cable source
to
ANT 1/MAIN.
ANT 1/MAIN and ANT 2/AUX can each receive digital
and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
2. COMPONENT Inputs (Audio and Video)
Y Pb Pr (480i/480p/720p/1080i)
Use these jacks to connect devices with component
video outputs, such as DVD players, external HDTV
receivers, or compatible video game systems. See
Appendix A specifications for signal compatibility.
3. PC/DVI AUDIO INPUT
Use the PC/DVI AUDIO INPUT when connecting a DVI
device to one of the TV’s HDMI inputs using a DVI-to-
HDMI cable. These jacks allow you to send left and
right analog audio from your computer or other DVI
device to the TV.
4. AVR AUDIO OUTPUT
Use AVR AUDIO OUTPUT to send analog audio of the
program currently shown on the screen to an A/V sur-
round sound receiver or stereo system. Digital audio
from digital channels and HDMI devices is converted to
analog audio by the TV. If using an analog A/V receiver
or stereo system, this is the only audio connection
needed between it and the TV.
ANT 2 / AUX
ANT 1 / MAIN
ANT 2/ AUX
ANT 1 / MAIN
ANT 2 / AUX
ANT 1 / MAIN
INPUT 1
INPUT 2
L ( MONO) R
AUDIO
DIGITAL
AUDIO
OUT HDMI
1 2
Y Pb Pr
AVR
AUDIO
OUTPUT
S-VIDEO VIDEO
3
L (MONO) - AUDIO - R
Y Pb Pr (480i/480p/720p/1080i)
VIDEO: 480i /480p /720p /1080i /1080p
AUDIO: PCM STEREO
PC: VGA / W-VGA / SVGA / W-SVGA /
XGA / W-XGA / SXGA / 720p /1080p
IR EMITTER
NetCommand R
PC/DVI
AUDIO
INPUT
COMPONENT 1
COMPONENT 2
ANT 2 / AUX
ANT 1 / MAIN
1
2
3
4
5
6
7 8
IR Emitter Jack included
on Y series and 734 series
models only.
Third HDMI input available on
Y, 733, and 734 series models.