Monessen Hearth SS38 - Manual (Page 32)

46D0232 32
SS38 Direct Vent Gas Stove
ST1117
VS38 replace glass
GLASS REPLACEMENT
1. Put on gloves. Remove door from hinges by lifting the
door up. Figure 48
2. Remove the 7/8" rope from around glass frame.
Figure 49
3. Using a 5/16" socket, remove hex nuts from glass retain-
ing brackets. Remove retaining brackets. Figure 49
4. Carefully remove broken glass.
5. Wrap new glass pane(s) with 3/4" gasket. Make sure
you have 1/4" overlap on each side.
6. Place new glass in frame. For three-piece glass style
frame, slide new glass into the 45° aluminum post (not
shown).
7. Fasten retaining brackets back into place with 5/16"
nuts.
8. Replace 7/8" rope. Make sure the joint is at the bottom
and there is no gap.
9. Slide door back down the hinges. Figure 48
Figure 49 -
Replace Formed Glass NOTE: Use only original MHSC
replacement parts.
Rope
Gasket
Gasket
Retaining
Brackets
Retaining
Bracket
Preformed
Glass
Hex Nuts
(not all shown)
CAUTION
Always use gloves when handling
broken glass.
W
ARNING
Make sure the glass panel edges do not
touch any metal parts during thermal
expansion.
ST1116
remove door
Figure 48 -
Remove Door from Hinges
Door
Hinges
ST1116
ST1117