Multi-Tech Systems BL-Series - Manual (Page 25)

25
Chapter 2 - Installation and Connection
9 Click Yes to read the Release Notes. when you are finished, close the release notes dialog and
the Trio Setup dialog is displayed.
10 Click Complete Installation and the installation introduction is presented.
11 Click Next Dialog and follow the on-screen instructions to load the software.
Once the software has finished loading, the following dialog is displayed:
12 Choose Manual Selection of Modem and Ports, then click Next Dialog. The following dialog is
displayed:
13 In the Com Port Selection group select the COM port, on which your modem is installed, from
the drop-down list.
14 In the Modem Type group select Class 2 Compatible from the drop-down list.