Multi-Tech Systems BL-Series - Manual (Page 46)

46
MultiModemBL User Guide
EXECUTE %DF Format Line Probe Display (Graph or Table Format)
LINE %DP Enable/Disable Reading Line Probe From DSP during handshake
PROBE L9 Display of Signal Strength Information
COMMANDS L10 Display Signal to Noise Ratio (SNR)
(2834 Series only) L11 Display of Noise Information
&RP Initiates Retrain to Read Line Probe Parameters
READ AND Sr? Read Current S-Register Value
ASSIGN Sr= Assign S-Register Value
S-REGISTER
VALUES
REMOTE #CBN Passwords for Callback Phone Numbers
CONFIGURATION #DB Callback Security Enable/Disable
& CALLBACK #I Change LOGIN Password
SECURITY #RCBNxx Erase Password Linked with Memory Location xx
#S Change SETUP Password
TEST MODEM U Self-Test Modem (Chapter 8)
&T Enable/Disable Digital Loopback Signal