4 is your modem ready for use, Is your modem ready for use – Multi-Tech Systems BL-Series User Manual
Page 26
26
MultiModemBL User Guide
15 Click Next Dialog. The Phone Numbers and Prefixes dialog is displayed.
16 Follow the on-screen instructions and when you are finished, click Next Dialog. The following
dialog is displayed:
17 Click OK, Exit the Installation Program. The Trio Applications program group is displayed.
Your Trio software is loaded. If you wish to begin using Trio right away, double click on the Trio
DataFax Voice icon. Refer to the Release Notes for instructions.
To quit Trio altogether, close the Trio Applications program group, and then click the Exit (
) icon
on the installation screen to exit the installation program.
2.4
Is Your Modem Ready for Use?
As soon as you have connected power to the modem, if you are an experienced modem user, you
may simply want to check your modem’s settings for data compression, error correction, and so on.
You may find that you can get moving quite quickly if you just issue an ATL5, ATL6 and an ATL7
command. These commands list how your modem is currently configured. If you come across a
setting you’re unsure of, refer to
for AT command and S-Register
explanations and defaults.
If you’re a novice, refer to