McIntosh MVP861 - Manual (Page 33)

33
SETUP, con’t
4. Next continue to the BASS ENHANCER (2 channel)
Menu. If no other changes are to be made in Setup
Mode at this time, exit by pressing the Down
direc-
tional Push-button to select the EXIT SETUP menu
choice followed by the SELECT Push-button and the
MVP861 will return to normal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Bass Enhancer (2 Channel)
The Bass Enhancer feature will copy the Low Frequency
Information from the Left and Right Channels of a 2-Chan-
nel CD recording and send it to the Subwoofer. To activate
the feature performing the following steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Setup Disc Setup
Menu. Then press the Right directional Push-button
to select the Audio Setup Menu Icon Tab. Refer to fig-
ure 41.
Note: If there is a Disc playing in the MVP861 press the
STOP Push-button twice before pressing the
SETUP Push-button.
2. To change from the default setting of Off to On use the
Up or Down directional Push-buttons to select
BASS ENHANCER followed by the SELECT Push-
button. Refer to figure 43.
Notes: The title of the icon button-bar will change color
from yellow (the cursor color) to green indicating
the selected item.
3. Return to the Audio Setup Menu by pressing the Up
directional Push-button.
4. Next continue to the RATINGS Menu. If no other
changes are to be made in Setup Mode at this time, exit
by pressing the Down
directional Push-button to se-
lect the EXIT SETUP menu choice followed by the
SELECT Push-button and the MVP861 will return to
normal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.