McIntosh MVP861 - Manual (Page 9)

9
Rear Panel Connections
Connect the MVP861
power cord to a live AC
outlet. Refer to infor-
mation on the back
panel of your MVP861
to determine the correct
voltage for your unit
POWER CONTROL IN
receives turn-on signals
from a McIntosh com-
ponent and POWER
CONTROL OUT sends
turn-on signals on to
another McIntosh Com-
ponent
DIGITAL AUDIO
OPTICAL OUTPUT
sends signals to a
Control Center with
a D/A Converter or
a decoder DATA IN receives
operating data from
a McIntosh Control
Center
DIGITAL AUDIO
COAXIAL OUTPUT
sends signals to a
Control Center with a
D/A Converter or a
decoder
VIDEO OUTPUT
supplies video sig-
nals to connect to a
Composite Input of
an A/V Control Cen-
ter or other video
component
S-VIDEO OUTPUT
supplies video signals
to connect to a S Input
of an A/V Control
Center or other video
component
UNBALANCED AUDIO OUTPUT
supplies Six Channels of Analog
Audio and connects to the External
Input of an A/V Control Center
Y OUTPUT supplies the Luminance Video Signal and
connects to the Y Component Input of the TV/Monitor
or other video component.
P
B
OUTPUT supplies the Blue minus Luminance
Video Signal and connects to the P
B
Component Input
of the TV/Monitor or other video component.
P
R
OUTPUT supplies the Red minus Luminance Video
Signal and connects to the P
R
Component Input of the
TV/Monitor or other video component
IR INput for
connecting an
IR Receiver BALANCED AUDIO
OUTPUTs supply two
channels of analog audio
to connect to Balanced
Inputs of other compo-
nents
UNBALANCED
AUDIO OUTPUT
supplies Two Chan-
nels of Analog Au-
dio and connects to
the Analog Input of
an A/V Control
Center RS232 connector
for connection to a
remote control
device