McIntosh MVP861 - Manual (Page 46)

46
How to Set and Activate Markers
This feature allows establishing up to five different starting
places on a disc where playback can start, other than at the
beginning of the disc.
1. Press the MRKR (Marker) Push-button and the Marker
On-Screen Icon will appear. Refer to figures 80 and 87.
2. Press the SELECT Push-button to enter the first start-
ing location. The highlighted “X” on the left side will
change to a number 1.
3. The second “X” from the end of the left side will now
be highlighted. Press the SELECT Push-button to enter
the second starting location. Refer to figure 81.
4. Enter a third starting point if desired. Up to five Mark-
ers can be stored in memory.
Note: If you wish to erase a MARKER, use the Left or
Right directional Push-buttons to select the
desired Marker and press the CLEAR push-button.
To start playback from a desired Marker Location perform
the following steps:
1. Press the MRKR (Marker) Push-button to select the
Marker On-Screen Icon, if not already displayed On-
Screen.
2. Using the Left or Right directional Push-buttons to
select the desired Marker Starting Location, then press
the SELECT Push-button.
3. Press the MRKR (Marker) Push-button to exit the
Marker On-Screen Icon.
DVD-Video Repeat
This allows repeating a DVD Chapter or the Title (the en-
tire movie) on a continuous basis. Refer to the lower right
hand corner of figures 82, 83 and figure 87.
1. Start playing the disc or the part of the disc you desire
to have repeated.
2. Press the RPT (Repeat) Push-button once to activate
the Chapter Repeat (1); press the RPT Push-button
twice to activate the Title Repeat (All). Refer to the
On-Screen Text Message.
3. To cancel the previously selected Repeat Mode, press
the RPT (Repeat) Push-button Push-button until the
On-Screen Text Message indicates “REPEAT Off” or
the word “REPEAT” in the lower right hand corner of
the Front Panel Alphanumeric Display is extinguished.
DVD-Audio Repeat
This allows repeating a DVD Track or the Group (a selec-
tion of tracks) on a continuous basis. Refer to the lower
right hand corner of figures 82, 83 and figure 87.
1. Start playing the disc or the part of the disc you desire
to have repeated.
How to Operate the MVP861, con’t
Figure 80
Figure 81
Figure 83
Figure 82