McIntosh MVP861 - Manual (Page 38)

38
How to Set the Other Setup
Player Mode
Some DVD-Audio Discs offer additional different play-
back features such as viewing photo gallery, song lyrics
and/or videos. Depending on the disc, some of features
may only be available when the MVP861 Player Mode is
set to the Video Mode. To change from the default setting
of Audio Player Mode to Video Player Mode, perform the
following steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Disc Setup Menu.
Then press the Right directional Push-button to se-
lect the “etc. Setup Menu Icon Tab”. Refer to figure 55.
Note: If there is a Disc playing in the MVP861 press the
STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button followed by
the SELECT Push-button on the Remote Control to se-
lect the PLAYER MODE Menu. Refer to figure 56.
3. To change from the default setting use the Up or
Down directional Push-buttons to select the VIDEO
followed by the SELECT Push-button.
Note: The title of the icon button-bar will change color
from yellow (the cursor color) to green indicating
the selected item.
4. Return to the Other Setup Menu by pressing the Up
directional Push-button.
5. Next continue to the CAPTIONS Settings. If no other
changes are to be made in Setup Mode at this time, exit
by pressing the Down
directional Push-button to se-
lect the EXIT SETUP menu choice followed by the
SELECT Push-button and the MVP861 will return to
normal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Captions
Some DVD Discs offer On-screen captions of the dialog,
adding enjoyment to the movie. To activate the Caption
feature perform the following steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Disc Setup Menu.
Then press the Right directional Push-button to se-
lect the “etc. Setup Menu Icon Tab”. Refer to figure 55.
Note: If there is a Disc playing in the MVP861 press the
STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button followed by
the SELECT Push-button on the Remote Control to se-
lect the CAPTIONS Menu. Refer to figure 57.
Figure 55
Figure 56
Figure 57