Hdd self test – MITSUBISHI ELECTRIC DX-NT400E User Manual

Page 18

Advertising
background image

18

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

HDD SELF TEST

HDD SELF TEST

Before using the HDD attached to this unit, test the HDD whether to be used correctly. There are 3 types of the test
method and choose one in the <HDD SELF TEST> screen. When choosing, refer to the table below which describes the
details of each method.

When the HDD is newly attached for recording, it is recommended to execute “READ/WRITE TEST” and

format all the area of the HDD before it is used for recording. Be sure that all the data in the HDD will be erased
when executing “READ/WRITE TEST.”

Test mode

Time needed

Contents of the test

Effect of the test

QUICK TEST

READ TEST

READ/WRITE
TEST

approx.1 minute

more than 1 hour
(for 240 GB)

more than
10 hours
(for 240 GB)

The reading and writing test executed in
the part of the HDD. The recorded
contents will not be affected by this test.

The reading test executed in all the
sectors in the HDD. The recorded
contents will not be affected by this test.

The reading and writing test executed in
all the sectors in the HDD. All the recorded
contents will be erased. The HDD will be
formatted to record or playback the data
stably.

Tests the compatibility beween the HDD
and the recorder.

In addition to the compatiblity test, criticizes
the partial sector defects in reading the
data.

In addition to the compatibility test,
criticizes the partial sector defects in
reading or writing. Also uses for the
screening effect by ageing or for erasing all
the data when dumping the HDD.

The recorded contents will not be affected when executing “QUICK TEST” or “READ TEST.” When executing

“READ/WRITE TEST,” be sure that all the recorded contents of both HDD (A and B) will be erased. When you
execute “READ/WRITE TEST,” attach one HDD to be tested and remove the other HDD with the contents you do
not want to erase.

This function temporarily tests the HDD whether it will be used correctly, and does not completely criticize the

defect involved in the HDD.

Advertising