MITSUBISHI ELECTRIC DX-NT400E - Manual (Page 32)

32
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Menu functions (continued)
<WARNING LOG LIST>
NO DATE TIME WARNING
>>0001 01-01-03 00:00:00 SYS RST <PASSWORD>
>>OPERATION CONTROL
HDD DATA CLEAR <PASSWORD SETTING>
FIRST SECOND
>>1 ---- ----
2 ---- ----
3 ---- ----
ENTER:TO SET PASSWORD
<PASSWORD SETTING>
FIRST SECOND
>>4 ---- ----
ENTER:TO SET PASSWORD
<LANGUAGE SELECTION>
>>LANGUAGE ENGLISH
JOG
↑
/
↓
:SELECT
ENTER :EXECUTE
<INITIAL SET UP/INFORMATION>
>>HDD SETTINGS
AUDIO RECORDING OFF
REAR TERMINAL SETTINGS
COMMUNICATION PORT SETTINGS
INFORMATION/SERVICE
PASSWORD
LANGUAGE SELECTION
<RESET TO FACTORY SETTINGS>
>>EXECUTE
ENTER:EXECUTE,CLEAR:CANCEL
<INFORMATION/SERVICE>
>>HDD INFORMATION
WARNING LOG LIST
RESET TO FACTORY SETTINGS
MAIN HDD DATA CLEAR
SUB HDD DATA CLEAR
ELAPSED TIME: 6H
HDD SETTING PARTITION
PARTITION SIZE 10
%
<MAIN HDD DATA CLEAR>
PUSH WARNING RESET KEY
FOR 3 SECOND TO CLEAR
<HDD INFORMATION>
A: HDD(120GB)
B: HDD(120GB)
MAIN START 01-01-2003 00:00:00
END 01-01-2003 00:00:00
SUB START 01-01-2003 00:00:00
END 01-01-2003 00:00:00
<SUB HDD DATA CLEAR>
PUSH WARNING RESET KEY
FOR 3 SECOND TO CLEAR
<INITIALIZATION>
>>HDD SETTING PARTITION
PARTITION SIZE 10
%
BOOT UP DELAY 30S
POWER OFF
INITIALIZATION
ALL DATA WILL BE ERASED
WHEN PROCEED INITIALIZATION
<SETTINGS>
>>TIME DATE/DISPLAY SETTINGS
MPX DISPLAY SETTINGS
MOTION DETECTION SETTINGS
RECORD SETTINGS
TIMER PROGRAM SETTINGS
INITIAL SET UP/INFORMATION
MEMO:
MAIN MENU
JOG button + POWER button
<WARNING LOG LIST> Page 54 <PASSWORD SETTING> Page 56
<PASSWORD SETTING> Page 56 <LANGUAGE SELECTION> Page 28
<PASSWORD> Pages 55 to 57
<RESET TO FACTORY SETTINGS> Page 54
SUB MENU (1)
<INITIAL SET UP/INFORMATION>
Pages 47 to 57
SUB MENU (2) SUB MENU (3)
<INFORMATION/SERVICE> Pages 54, 55
<MAIN HDD DATA CLEAR> Page 55
<HDD INFORMATION> Page 54
<SUB HDD DATA CLEAR> Page 55 <INITIALIZATION> Page 21
SET UP button
*1
*1
*1
*1
*1: displays when PARTITION is performed.